Window Replacement Richmond Hill- Why E -Glass Is Important

Window Replacement Richmond Hill- Why E -Glass Is Important

If you have been searching about window replacement Richmond Hill, you might have come across this term “Low-E” glass. This is a common feature in modern windows and provides a myriad of advantages over traditional windows.

But do you know what this term means? Well, this is a crucial feature to look for in modern windows replacement Richmond Hill if you want to increase the energy efficiency of your home. We have highlighted here all the main things you should understand about Low-E glass in Richmond Hill and how it is useful in saving your money. Continue reading to see more.

  1. What Is the Meaning of Low-E?

Low-E is a short form of “Low Emissivity” which typically means the amount of sun’s rays or radiations that pass through the window glass. Window glasses that are not Low-E allows most of the sun’s radiation into the room without filtering the dangerous elements of the radiation. Sunlight is composed of three main components; the visible light, ultraviolet, and infrared radiation. What you need is the visible light for room illumination. You don’t need UV light which is more dangerous on your furniture. It also causes sunburns on your skin.

With low emissivity window replacement Richmond Hill, the dangerous UV and infrared radiation are filtered, and only less of these radiations is allowed into your home. This improves heat insulation and protects your home and its interior components.

  1. Types of Low-E Coating.

Most modern windows Richmond Hill come with either soft-coat Low-E glass or hard-coat Low-E glass. Each of these types come with its advantages and disadvantages depending on the climate of your area which significantly determines the amount of solar radiation you receive.

  1. Hard-Coat Low-E Glass.

This is also called passive glass. It is usually applied during the process of producing the glass in the industry. The coating is put to the glass strip and then extended to the float line and then bonded to the already hot glass through a process known by manufacturers as pyrolytic bonding. It is incredibly long-lasting since it is incorporated directly into the glass. However, it is not so effective since it allows some UV radiations.

  1. Soft-Coat Low-E Glass.

It is also called solar control Low-E glass. It is usually applied to the glass after manufacturing of the glass. It is implemented in the form of a coating by use of Magnetron Sputtering Vapour Deposition (MSDVD)

  1. Which Low E Costing Should you Use for My Windows Richmond Hill?

The place where you live is the critical factor which determines the type of Low-E coating glass you will use for your window replacement Richmond Hill. If you live in extremely cold areas such as in northern Canada, it is recommended to go for hard coat Low-E glass. If you live in regions that experience hot summers and cold winters, then soft coat Low-E glass is appropriate.